REFSHEET-Messeparkhaus-mainimg

Switzerland

Messe Parking House

Project description

Extensive refurbishment work was carried out in the multi-storey car park "Messe ­Zurich Hallenstadion" in Zurich.

One measure concerned the support of the Hoesch-Additiv ceiling ribs with folding beams. The support has to be elastic, but at the same time very small tolerances in terms of short and long-term creep as well as dimensional accuracy are required.

In addition, the bearing should also be able to accommodate rotations despite the thin layer thickness.

mageba scope

A total of 14,170 units of LASTO®BLOCK F with special design requirements were ­delivered.

The limited vertical deformation and rotational capacity requested were met by the bearing's specially adapted layer thickness.

Due to the exposure of the bearings it was also essential to use stainless steel for the reinforcement of the elastomeric ­bearings.

The product solution convinced with its ability of combining the stainless steel with the elastomer as well as the specially used elastomeric compound allowing predictions of the creep deformation.

Refsheet-Messeparkhaus-ceiling-rib-and-bearing

Construction detail of the bearing with ceiling rib

Refsheet-Messeparkhaus-LASTO-BLOCK-B-Installed

Bearing in installed condition under the ceiling ribs

Key Data

Type:

LASTO-BLOCK F

Installation:

2017

City:

Zürich

Type:

Park house

Completion:

2018

Contractor:

Schneider Stahlbau AG

Engineer:

Peter Bachmann Ingenieurbüro