Tél: +41-44-872 40 50
The Golden Ears Bridge, near Vancouver, British Columbia, creates an important new transportation link across the Fraser River. The bridge, with three main spans each 242 m (795 ft) long, features an unusual hybrid cable stayed system designed to ensure a specified performance in the case of defined earthquake events. The bearings and expansion joints for the bridge are also subjected to such demands, making their design and fabrication an interesting challenge.
Main span bearings:
mageba supplied four custom-designed uplift bearings, pre-compressed for frequent load reversal. Each bearing weighs a massive 17 tons and can accommodate a wide range of loads from 4,170 kN to –2,790 kN (uplift), longitudinal movements of 3,100 mm (122 in), transverse movements of 50 mm (2 in) and rotations of 0.039 radians about the x-axis and 0.010 radians about the y-axis.
In addition to the bearings, 12 TENSA-MODULAR LR expansion joints were supplied by mageba. The largest, type LR17 with 17 individual gaps, will allow longitudinal movements of 1,350 mm (53 in). The joints are also equipped with ‘Fuse-Box’ earthquake protection devices which prevent serious damage to the joint, and the connecting bridge structure, in the event of an earthquake. The ‘Fuse-Box’ also enables the modular expansion joint to continue to allow passage of emergency vehicles after a seismic event.
TENSA-MODULAR expansion joints, with up to 17 gaps, and 4 special uplift bearings
Expansion joints hot dip galvanized, max. movement 1‘360 mm, max. load 4‘170 kN
Hybrid cable stay design
2,410 m 1.45 mi
GCCJV (Bilfi nger Berger and others)