Sede principal
mageba sa
Trafostrasse 1
8180 Bulach
Switzerland
Tel: +41-44-872 40 50
Fax:
The Margaret Bridge is a three-way bridge in the capital of Hungary, connecting Buda and Pest across the river Danube and linking Margaret Island to the banks. It is the second-oldest public bridge in Budapest built between 1872 and 1876.
By the beginning of the 2000s, the bridge was in a very bad shape. The fact that the condition of the bridge was rated as life threatening demanded an immediate reconstruction, which started in 2009. During the works the City of Budapest aimed to restore the original appearance of the bridge. Instead of using reinforced concrete, durable steel was used. New barriers and floodlights were also installed. The middle lanes were widened and the sidewalk was expanded by two meters. A bicycle lane was also added to the final design.
mageba delivered the following products:
• TENSA-FINGER cantilever finger joint of of type F80LL and F120LL
• TENSA-GRIP single gap joints of type WSF80
mageba was also tasked to install the joints. The two pairs of tram rails running across the bridge, and the narrow time frame that was provided for the installation made the project challenging. Despite of these difficulties mageba successfully implemented both, the production and the installation of the joints in due time.
Products: | TENSA-GRIP single gap joint of type WSF80, TENSA-FINGER cantilever finger joints of type F80LL and F120LL |
Installed: | 2010 |
City: | Budapest |
Structure: | Three-way bridgeTied-arch bridge |
Construction: | 1872–1876 |
Renovation: | 2009–2011 |
Length: | 607 m |
Owner: | City of Budapest |
Engineer: | Ernest Goüin |
Contractor: | Ernest Goüin et Cie. |