Головной офис
mageba sa
Solistrasse 68
8180 Bulach
Switzerland
Тел: +41-44-872 40 50
Факс:
Индия
Bandra Worli Sea Link
Project description
Forming a much needed new link between the island city of Mumbai and its populous western suburbs, the 5.6km long Bandra Worli Sea Link includes the 600 m long single tower cable stayed Bandra Bridge with 250m main spans and the 350 m long Worli Bridge, also with a single central tower and main cable stayed spans of 150 m. Eight lanes of traffic, including two dedicated bus lanes, run on the twin precast concrete box girder bridge decks. High strength concrete containing microsilica slurry is used throughout. Foundations for the main towers are 2m diameter drilled shafts 25m deep.
Mumbai and its suburbs have a total population approaching 13M, making it the second most populous conurbation in the world after Shanghai. The new crossing will relieve traffic pressures on the highly congested Mahin Causeway, where it can take peak hour commuters 40 minutes to cover the 8km of causeway.
Delivered products
No less than 26 TENSA-MODULAR expansion joints were needed for this project, ranging from the LR2 version up to the LR6 with a maximum capacity of 480mm longitudinal movement. In addition, 126 RESTON-DISC disc bearings (Vmax = 14,000 kN) and hundreds of elastomeric bearings where supplied for this extraordinary bridge structure.
Lifting of a modular expansion joint into position
Installation of an expansion joint
Ключевая информация
Products: | TENSA-MODULAR type LR2 - LR6, RESTON-DISC bearing |
Features: | max. movement 480mm |
Installed: | 2009 |
City: | Mumbai |
Type: | A pylon cable-stayed bridge |
Length: | 600m |
