Refsheet-Reussbrücke-Gnadenthal-mainimg

Швейцария

Reussbrücke Gnadenthal

Project description

The new bridge crosses the Reuss River in Stetten/Niederwil below the Reusspark Clinic. The bridge structure is based on two elegant river pillars and on the landside abutments. These in turn are supported on cast-in-place concrete bored piles. A trough formed from weather-resistant steel serves as the load-bearing element for the superstructure. The 100 m long superstructure is made of reinforced concrete.

mageba scope

The limited space available on the pylons required special attention in the selection of the structural bearings. mageba‘s RESTON®SPHERICAL bearings equipped with ROBO®SLIDE sliding material are fitting perfectly to the modern bridge design. In order to minimize the traffic noise emission mageba‘s plug joint TENSA®POLYFLEX®Advanced was installed. It is the first flexible plug expansion joint to be installed in the canton of Aargau.

Refsheet-Reussbrücke-Gnadenthal-polyflex-belagsdehnfuge-installation

Installation of TENSA®POLYFLEX®Advanced plug expansion joint

Refsheet-Reussbrücke-Gnadenthal-spherical-bearing-installed

Structural bearing RESTON®SPHERICAL bearing installed on the abutment

Ключевая информация

Type:

TENSA®POLYFLEX Advanced PA-60 PU plug expansion joints, RESTON®SPHERICAL bearings

Installation:

2016

City:

Stetten/Niederwil AG

Structure:

Steel composite bridge

Main span:

40 m

Length:

100 m

Completion:

2016

Owner:

Kanton Aargau

Contractor:

Rothpletz, Lienhard + Cie AG in ARGE

Engineer:

Bänziger Partner AG Engineering

Architect:

E. Imhof