Головной офис
mageba sa
Trafostrasse 1
8180 Bulach
Switzerland
Тел: +41-44-872 40 50
Факс:
Швейцария
Reussbrücke Gnadenthal
Project description
The new bridge crosses the Reuss River in Stetten/Niederwil below the Reusspark Clinic. The bridge structure is based on two elegant river pillars and on the landside abutments. These in turn are supported on cast-in-place concrete bored piles. A trough formed from weather-resistant steel serves as the load-bearing element for the superstructure. The 100 m long superstructure is made of reinforced concrete.
mageba scope
The limited space available on the pylons required special attention in the selection of the structural bearings. mageba‘s RESTON®SPHERICAL bearings equipped with ROBO®SLIDE sliding material are fitting perfectly to the modern bridge design. In order to minimize the traffic noise emission mageba‘s plug joint TENSA®POLYFLEX®Advanced was installed. It is the first flexible plug expansion joint to be installed in the canton of Aargau.
Installation of TENSA®POLYFLEX®Advanced plug expansion joint
Structural bearing RESTON®SPHERICAL bearing installed on the abutment
Ключевая информация
Type: | TENSA®POLYFLEX Advanced PA-60 PU plug expansion joints, RESTON®SPHERICAL bearings |
Installation: | 2016 |
City: | Stetten/Niederwil AG |
Structure: | Steel composite bridge |
Main span: | 40 m |
Length: | 100 m |
Completion: | 2016 |
Owner: | Kanton Aargau |
Contractor: | Rothpletz, Lienhard + Cie AG in ARGE |
Engineer: | Bänziger Partner AG Engineering |
Architect: | E. Imhof |
