Tél: +41-44-872 40 50
The Eleftheria Square in Cyprus‘ capital Nicosia constitutes a dramatic and historically significant ‘architectural intervention’ – an aspiration to reconnect the ancient city‘s massive fortified Venetian walls and moat with the modern city beyond – a bold vision of coherence and continuity which can become a catalyst to unify the last divided capital of Europe.
As the city expanded out of the medieval walls wooden bridges were constructed to facilitate transport. The original wooden bridge known as the Hajisavvas Opening was then replaced with a solid concrete one, which survives to date. In 2005 an architectural competition was announced to redesign the square. This was won by a group led by Zaha Hadid Architects.
mageba received an order of 19 RESTON-POT bearings as per EN1337 and CE-labelled. All bearings are multidirectional (free) and the maximum vertical load (ULS) is 11,207 kN. Friction was not considered for the transmission of the horizontal loads since Cyprus is a seismic area.
Due to the special geometry of the columns, space for the bearings was limited. In close cooperation with the structural engineer and the architect, mageba has worked out a proper solution that meets the requirements of this exceptional design.
Finally, and due to the fact that the bearings would be visible, the bearings had to be white coloured including the EPDM dusk skirts.
EPDM dusk skirts, white coloured
Zaha Hadid Architects
LOIS Builders Ltd