UnterlandautobahnS10-mainimg

Suisse

Lowlands Motorway S-10

Project Description

In 2004, the existing expansion joint was replaced on the S-10 Viaduct near Bulach, between Zurich and Schaffhausen (Switzerland).

The so called twin bridge has a total length of about 295 meters and is supported on 8 twin columns. The spans between supports are between 23 and 40 meters.

After about a 20-year-long useful life, the existing expansion joints were replaced by a mageba RSFD cantilever finger joint construction.

Delivered products

Two RSFD cantilever finger joints, with a maximum movement capacity of 160mm, were installed on the northern side of the Viaduct. Single gap expansion joints with a movement capacity of 80mm were used on the southern side. Due to the open construction of the cantilever finger joint, a maintenance-friendly drainage system with a sideways fixed overflow system was chosen. In order to optimise the driving comfort and to expand the fatigue live of the asphalt, supporting ribs with the Robo®Dur system were placed on both sides of the joint. The supporting ribs secure massive strengthening of joint beams, so that lane grooves do not form in the asphalt, as a result of heavy loads. The supporting ribs are aligned under a 45º angle.

UnterlandautobahnS10-img3

Production of a TENSA®FINGER type RSFD expansion joint in mageba’s Bulach factory

UnterlandautobahnS10-img1

Exact levelling of the RSFD cantilever finger joint construction.

UnterlandautobahnS10-img5

Connection of deck waterproofing membrane to joint’s horizontal flange

UnterlandautobahnS10-img4

Slots cut in the road surface at 45° to the joint, and filled with ROBO®DUR

UnterlandautobahnS10-img2

Smooth crossing due to an innovative supporting rib construction system ROBO®DUR

En bref

Products:

TENSA®FINGER type RSFD, TENSA®GRIP type RS, ROBO®DUR asphalt strengthening ribs

Features:

max. movement 160 / 80mm

Installed:

2003

City:

Bulach

Type:

Viaduct

Length:

295m