Refsheet-Dubai-Metro-Route-2020-mainimg

UAE

Dubai Metro Route 2020

Project description

Route 2020 is an extension of the Red Line of the Dubai Metro, and connects the
Jabal Ali Metro Station with the Expo 2020 site.

The new line has seven stations and a total length of 15 km. Route 2020 has two distinctive parts: an elevated section with a total length of 11.8 km, and a 3.2-kilometre-long underground section.

The new extension has the capacity of 46,000 passengers per hour in both directions (23,000 passengers per hour per direction).

A study conducted by RTA showed the number of passengers using Route 2020 would reach 125,000 per day in 2021, which will expected to further increase to 275,000 travellers per day by 2030.

mageba scope

mageba supplied a large number of pot and spherical bearings for the elevated section of the metro line.

In total 65 RESTON-SPHERICAL bearings were produced and installed with a maximum load capacity of 37,295 kN. All bearings were produced in line with the ETA requirements.

Furthermore, 384 RESTON-POT HP bearings were also supplied with a maximum load capacity of 37,295 kN each.

In addition, mageba’s ROBO-SMART monitoring system was also integrated into one of the pot bearings, where sensors measure loads and movements.

A 20 years maintenance contract has been concluded with the client, and mageba has to perform periodical inspections at every 5 years to verify proper functionality of the bearings and the current condition of performance.

Refsheet-Dubai-Metro-Route-2020-RESTON-POT-bearings-installed

RESTON-POT bearings support the metro line’s superstructure

Refsheet-Dubai-Metro-Route-2020-ROBO-SMART-integrated-to-RESTON-POT

ROBO-SMART monitoring system was integrated to one of the RESTON-POT HP bearings

Key Data

Products:

RESTON-POT HP and RESTON-SPHERICAL bearings ROBO-SMART monitoring system

Installation:

2019

City:

Dubai

Length:

11.8 km

Completed:

2020

Owner:

RTA Dubai (Rail)

Client:

CWJV Acciona- Gulermak

Engineer:

Parsons System