REFSHEET-Parkhaus-Schwarzwaldstrasse-mainimg

Switzerland

Parking House – Schwarzwaldstrasse

Project description

The construction project of Roche in Basel is to be an interim solution, which will be carried out in a typical reinforced concrete construction.

The very large concreting sections made it necessary that the supports of the slabs were not rigid, but had to be designed in a sliding manner. In this way, constraint forces could be avoided, which had a positive influence on the construction.

mageba was able to convince with its special bearing LASTO-STRIP XM in terms of load-bearing capacity in the smallest space and very short delivery times.

Gelieferte Produkte

A total of 100 m of LASTO-STRIP XM, a special type of LASTO-FLONPAD GP9 sliding bearing pad, were delivered.

This type is used especially for in-situ concrete construction where high load-bearing capacity and high dimensional stability are required.

With this bearing, mageba had the perfect solution and was able to meet all the requirements of the planning engineering office.

Refsheet-Parkhaus-Schwarzwaldstrasse-lasto-flonpad

Bearing before concreting view from above

Refsheet-Parkhaus-Schwarzwaldstrasse-LASTO-FLONPAD-Gleitlager

Bearing before concreting view from below

Key Data

Typ:

LASTO-STRIP XM, LASTO-FLONPAD GP9 Sliding bearings

Installation:

2017

City:

Basel

Type:

Parking house

Built:

2018

Owner:

Hoffmann-La Roche AG

Contractor:

Anliker AG

Engineer:

WMM Ingenieure AG

Architect:

Kägi Schnabel Architekten