Headquarters:
mageba sa
Trafostrasse 1
8180 Bulach
Switzerland
Tel: +41-44-872 40 50
Fax:
Switzerland
Parking House – Schwarzwaldstrasse
Project description
The construction project of Roche in Basel is to be an interim solution, which will be carried out in a typical reinforced concrete construction.
The very large concreting sections made it necessary that the supports of the slabs were not rigid, but had to be designed in a sliding manner. In this way, constraint forces could be avoided, which had a positive influence on the construction.
mageba was able to convince with its special bearing LASTO-STRIP XM in terms of load-bearing capacity in the smallest space and very short delivery times.
Gelieferte Produkte
A total of 100 m of LASTO-STRIP XM, a special type of LASTO-FLONPAD GP9 sliding bearing pad, were delivered.
This type is used especially for in-situ concrete construction where high load-bearing capacity and high dimensional stability are required.
With this bearing, mageba had the perfect solution and was able to meet all the requirements of the planning engineering office.
Bearing before concreting view from above
Bearing before concreting view from below
Key Data
Typ: | LASTO-STRIP XM, LASTO-FLONPAD GP9 Sliding bearings |
Installation: | 2017 |
City: | Basel |
Type: | Parking house |
Built: | 2018 |
Owner: | Hoffmann-La Roche AG |
Contractor: | Anliker AG |
Engineer: | WMM Ingenieure AG |
Architect: | Kägi Schnabel Architekten |
