Products

Watertight expansion joint systems

Expansion joints

MIGUTAN for use with bituminous sealing membranes

Very high load capacity of up to 600 kN

For use with bituminous floor sealants

Suitable for high loads, no risk of rust

Rubber seal can be replaced without damaging floor covering

Watertight expansion joint systems

Expansion joints

MIGUTAN for use with liquid seal solutions

Very high load capacity of up to 600 kN

Suitable for use with liquid floor sealants

Fibre-coated connection membranes for optimal adhesion

Rubber seal can be replaced without damaging floor covering

Watertight expansion joint systems

Expansion joints

MIGUTAN for use with seamless floor coatings

Very high load capacity of up to 600 kN

For use with a high-performance seamless floor covering (e.g. epoxy / polyurethane)

Suitable for high loads, no risk of rust

Rubber seal can be replaced without damaging floor covering

Watertight expansion joint systems

Expansion joints

MIGUTAN joints for concreting in place

For installation in concrete

With anchor studs or anchor loops

Rubber seal can be replaced without removing the floor surfacing

May be installed in formwork

All-metal expansion joints

Expansion joints

MIGUTRANS for normal traffic loads

For floors with normal loading

Maintenance-free, wear-resistant and durable

No dirt accumulation

High slip resistance

Multi-hole baseplates for excellent connection

All-metal expansion joints

Expansion joints

MIGUTRANS for high traffic loads

For highly loaded floors

No dirt accumulation, little cleaning effort

Minimises vibrations during crossing by vehicles

Multi-hole baseplates for excellent connection

All-metal expansion joints

Expansion joints

MIGUTRANS for retrofitting

With surface-mounted connection plates, ideal for retrospective installation

Suitable for pedestrian traffic and high-load vehicular traffic

Ideal for renovation and modernisation projects

No dirt accumulation

All-metal expansion joints

Expansion joints

MIGUTRANS for very high traffic loads

Suitable for trucks, forklift trucks, etc.

Vibration-free crossing for wheels of width 100 mm or more

Visible surface of stainless steel (grade 1.4301 or 1.4571)

All-metal expansion joints

Expansion joints

MIGUTRANS for very high traffic loads, watertight

With a sealing membrane for watertightness

Suitable for trucks, forklift trucks, etc.

Vibration-free crossing for wheels of width 100 mm or more

All-metal expansion joints

Expansion joints

MIGUTRANS for vibration-free crossing

Vibration-free crossing

Especially suitable for transport of delicate goods

Maintenance-free, wear-resistant and durable

Suitable for high traffic loading

Structure-born noise isolation

Vibration damping

VIBRAX-STAIRTOP SL

Pin for fixing the position of concrete elements

Vulcanized elastomer sheath reduces structure-borne noise transmission

Installation sleeve available for prefabricated structural elements

Steel expansion joints

Expansion joints

TENSA-GRIP RB

Typical movements: Up to 80 mm

High-strength and robust

Watertight, suitable for external areas

Vibration-free crossing thanks to fingerplate surfacing

Numerous connection possibilities

Sliding point bearing

Structural bearings

LASTO-FLONPAD GP 6

Sliding bearing for pressures of up to 5 N/mm2

Can be used to accommodate large movements

Low-friction and durable

Special bearings possible for accommodation of very large movements

Thermal isolation bearing

Structural bearings

LASTO-BLOCK T

For pressures of up to 52 N/mm2 (depending on shape)

High-strength thermal isolation bearing

High durability

For accommodation of high vertical loading with little deformation or heat conduction

Stainless steel expansion joint

Expansion joints

MIGUTEC for aggressive substances

Abrasion- and temperature-resistant seal

Robust and durable stainless steel legs

Multi-hole baseplates for optimal anchorage

Can facilitate movements in all directions

Expansion joint profile

Expansion joints

MIGUTEC standard floor joints

Suitable for various floor surfacing types

Abrasion- and temperature-resistant seal

Quick installation in tiled floors etc.

Expansion joint profile

Expansion joints

MIGUTEC contraction joint profiles

Discreet thanks to low visable width

Multi-hole baseplates for optimal anchorage

Wear-resistant, maintenance-free, durable

Expansion joint profile

MIGUTEC profiles for hygienic areas

Smooth rubber seal for residue-free cleaning

Antibacterial and physiologically harmless

Abrasion- and temperature-resistant seal

Expansion joint profile

Expansion joints

MIGUTEC profiles for rehabilitation works

Ideal for retrofitting in existing structures

Rubber seal can be replaced at any time

Extremely flat design

Non-slip surface

Expansion joint profile

MIGUTEC wall and ceiling profiles

For various installation scenarios

For small and large movements

Quick and easy installation

Separation layer

Structural bearings

LASTO-STRIP PE

Permanently elastic foam material

Suitable for use as separation layer in lightly loaded applications

Reduces structure-borne noise

POLYFLEX-SLIM PU

Extremely strong and durable

Low-depth installation thickness of just 40mm

Can be loaded after just a few hours

Absolutely watertight

No increase in noise from traffic thanks to seamless surface

Deformation bearings

Structural bearings

LASTO-BLOCK B

Gängige Lasten: 100 bis 20'000 kN

Bewehrtes, hochbelastbares Verformungslager

Zur Aufnahme von Vertikallasten, Bewegungen und Rotationen

Deformation bearings

Structural bearings

LASTO-BLOCK F

For pressures of up to 20 N/mm2 (depending on shape)

Unreinforced high-strength deformation bearing

For vertical loads, horizontal displacements and rotations

Stair bearing

Vibration damping

VIBRAX-STAIR

Bearing for the structure-borne sound insulation of stairs

Suitable for common bearing applications and stair slab weights

Designed for all loads and widths

Suitable for prefabricated or in-situ concrete construction

Linear bearing for slabs

Structural bearings

LASTO-STRIP

Constraint-free transmission of loads and accommodating of movements and rotations

As a slab bearing, prevents undesired edge pressures

Elastic, reduces structure-borne noise

Available as a special bearing for eccentric loads etc.

Wall bearings

Structural bearings

LASTO-WALL G

Reduces structure-borne noise

High-strength

Load capacity tested in accordance with SIA 266:2015

Membrane sliding bearing

Structural bearings

LASTO-FOL G/GE

For pressures of up to 6 N/mm2 or 10 N/mm2 respectively

Rotation-free separation of structural elements

Low-friction

Suitable for accommodating large horizontal movements

Rubber compression joint

Expansion joints

TENSA-COMPRESS A

Facilitates movements and closing of structural joint gaps

For joint movements of up to 65 mm

Quick and easy installation

Rubber compression joint

Expansion joints

TENSA-COMPRESS N

Facilitates movements and closing of structural joint gaps

For joint movements of up to 20 mm

Quick and easy installation

Impact sound insulation

Vibration damping

VIBRAX-DAMP 17-8

For pressures of up to 100 kN/m2

Can reduce impact/footfall noise by approx. 30 dB

Profiled rubber fibre mat

Also suitable for tackling structure-borne noise

Certified with the CE label

Impact sound insulation

Vibration damping

VIBRAX-FOAM 17/8

For pressures of up to 20 kN/m2

Can reduce impact/footfall noise by approx. 35 dB

Profiled mat from granulated PU foam material

Suitable for isolation of structure-borne noise and vibrations

Certified with the CE label

Impact sound insulation

Vibration damping

VIBRAX-MULTI 8/4

For pressures of up to 100 kN/m2

Can reduce impact/footfall noise by approx. 26 dB

Profiled rubber granulate mat bonded with PU elastomer

Suitable as sound insulation on wooden structures

Certified with the CE label

Vibration isolation bearings

Vibration damping

VIBRAX-CRANE

Structure-borne sound insulation of 20-30 dB, depending on frequency

Specially developed system for vibration isolation of crane rails

Reinforced and unreinforced vibration-damping bearings as vertical / horizontal bearings

Vibration isolation bearings

Vibration damping

VIBRAX-DAMP B

Load range: 300 to 700 kN/m2

Natural frequency range: > 18 Hz

Profiled elastomeric bearing of EPDM

The cross-sectional profile of the bearing minimises transmission of transverse forces

Vibration isolation bearings

Vibration damping

VIBRAX-DAMP C

Load range: 1000 to 4000 kN/m2

Natural frequency range: > 19Hz

Profiled elastomeric bearing of natural rubber (NR)

One side profiled with cylindrical rubber studs

Can be freely cut to size

Vibration isolation bearings

Vibration damping

VIBRAX-BLOCK B

Load range: 3,000 to 10,000 kN/m2

Natural frequency range: > 5 Hz

Reinforced elastomeric bearing of natural rubber (NR)

Suitable for use in groundwater

Load- and requirement-specific production

Vibration isolation mats

Vibration damping

VIBRAX-DAMP

Load range: 100 to 4000 kN/m2

Natural frequency range: > 15 Hz

Rubber fibre mat bonded with PU elastomer

Installation thicknesses from 10 to 30 mm

Vibration isolation mats

Vibration damping

VIBRAX-DYN

Load range: 75 to 9000 kN/m2

Natural frequency range: > 6 Hz

Closed-cell PUR elastomer mat

Suitable for use in groundwater

Coloured according to load-bearing capacity

Vibration isolation mats

Vibration damping

VIBRAX-PUR

Load range: 10 to 2800 kN/m2

Natural frequency range: > 8 Hz

Mixed-cell PUR elastomer mat

Coloured according to load-bearing capacity

Easy installation and high long-term stability

Vibration isolation mats

Vibration damping

VIBRAX-MULTI

For pressures of up to 200 kN/m2

Can reduce impact/footfall noise by approx. 24 dB

Rubber granulate mat bonded with PU elastomer

Suitable as sound insulation on wooden structures

Certified with the CE label

Sealing and bonding materials

MULTIFIX

MULTIFLEX