Headquarters:
mageba sa
Solistrasse 68
8180 Bulach
Switzerland
Tel: +41-44-872 40 50
Fax:
Products
No product found.
Deformation and sliding bearing
Structural bearings
LASTO-FLONBLOCK D
Reinforced elastomeric bearing with PTFE sliding surface
Certified with the CE label
Allows large rotations
Low-friction
Sliding point bearing
Structural bearings
LASTO-FLONPAD GP
Sliding bearing for pressures of up to 15 N/mm2
Can be used to accommodate large movements
Low-friction and durable
Special bearings possible for accommodation of very large movements
Thermal isolation bearing
Structural bearings
LASTO-BLOCK T
For pressures of up to 52 N/mm2 (depending on shape)
High-strength thermal isolation bearing
High durability
For accommodation of high vertical loading with little deformation or heat conduction
Separation layer
Structural bearings
LASTO-STRIP PE
Permanently elastic foam material
Suitable for use as separation layer in lightly loaded applications
Reduces structure-borne noise
Pot bearings
Structural bearings
RESTON-POT
Typical loads: 500 to 120,000 kN
Strong and compact
Allows large rotations
Can rotate about any horizontal and vertical axis
Exceptionally reliable vulcanized sealing detail
Spherical bearings
Structural bearings
RESTON-SPHERICAL
Typical loads: 1,000 to 250,000 kN
Particularly strong and compact
Allows very large rotations
Can rotate about any horizontal axis
ROBO-SLIDE sliding material gives exceptional strength and durability
Elastomeric bearings
Structural bearings
LASTO-BLOCK B
Typical loads: 100 kN to 20,000 kN
Reinforced high-strength deformation bearing
For vertical loads, horizontal displacements and rotations
Elastomeric bearings
Structural bearings
LASTO-BLOCK F
For pressures of up to 20 N/mm2 (depending on shape)
Unreinforced high-strength deformation bearing
For vertical loads, horizontal displacements and rotations
Linear bearing for slabs
Structural bearings
LASTO-STRIP
Constraint-free transmission of loads and accommodating of movements and rotations
As a slab bearing, prevents undesired edge pressures
Elastic, reduces structure-borne noise
Available as a special bearing for eccentric loads etc.
Wall bearings
Structural bearings
LASTO-WALL G
Reduces structure-borne noise
High-strength
Load capacity tested in accordance with SIA 266:2015
Membrane sliding bearing
Structural bearings
LASTO-FOL G/GE
For pressures of up to 6 N/mm2 or 10 N/mm2 respectively
Rotation-free separation of structural elements
Low-friction
Suitable for accommodating large horizontal movements
