Goldsboro-North Carolina-Interstate-795-mainimg

미국

Goldsboro Bypass

Project description

The Goldsboro Bypass is a 20-mile bypass of the city of Goldsboro, North Carolina. Also known as Highway 44 (NC 44), it will connect to US Highway 70 (US 70), one of the major east-west corridors traversing eastern North Carolina. Construction started in 2008, and the first phase opened in December 2011. The bypass includes a number of structures to cross roads, rivers and streams.

mageba scope

A total of 32 expansion joints are being supplied by mageba to accommodate the movement demands of six highway bridges. With longitudinal movements limited to just 2.8 inches (70 mm), single gap joints were preferred in order to maximize durability and minimize maintenance and renewal requirements. The TENSA-FORCE RG10 type joints were selected to meet the specific needs of the North Carolina DOT. These joints are commonly being used in the area to replace existi ng compression seal joints which have shown major deteriorati on over the years.

Goldsboro-North Carolina-Tensa-Force-img1

Image of a TENSA®FORCE RG10 expansion joint, with sharp upturns at each end

Goldsboro-North Carolina-Tensa-Force-img2

Two TENSA®FORCE RG10 expansion joints as fabricated, ready for installation

주요 데이터

Products:

TENSA®FORCE expansion Joints, 2.8” movements

Installation:

2014

City:

Goldsboro, North Carolina

Type:

Highway bridges

Built:

2013-2014

Length:

1,385 ft

Contractor:

S. T. Wooten