전화: +41-44-872 40 50
The town of El Puerto de Santa Maria on Spain’s south coast is served by a new highway viaduct connecting to the region’s A-4 and A-491 highways. The viaduct has a total length of 440 m, with 14 spans of approximately 30 m each. The deck’s “fixed point” is at its mid-length, so the greatest movements experienced by the deck are at its abutments. The viaduct has a prominent horizontal curve at its centre, resulting in the need to facilitate transverse movements at each pier as the deck expands and contracts due to thermal effects.
In consultation with mageba, the bearings and expansion joints to be used on the structure were selected to optimise performance at each location. Rather than limiting the solution to a single type of product in each case, two types of bearing (spherical and elastomeric), and two types of expansion joint (modular and finger) were selected for use on the same structure – a rather uncommon degree of variety. With LASTO-BLOCK and RESTON-SPHERICAL bearings, and TENSA-MODULAR LR and TENSA-FLEX RC expansion joints, the structure demonstrates well the diversity of mageba’s product range.
RESTON-SPHERICAL, LASTO-BLOCK, TENSA-MODULAR LR, TENSA-FLEX RC
Puerto de Santa Maria
R.C. highway viaduct