Refsheet-Delaware-Memorial-Bridge-mainimg

États-Unis

Delaware Memorial Bridge

Project description

The Delaware Memorial Bridges is a twin suspension bridge crossing the Delaware River. The toll bridges carry Interstate 295 and U.S. Route 40 between Delaware and New Jersey.

It is one of only two crossings of the Delaware River with both U.S. Highway and Interstate Highway designations, the other being the Benjamin Franklin Bridge.

Scope of this project was to replace the existing pin & links, with modern uplift spherical bearings which offer lower friction as well as a robust uplift restraint.

The project’s engineers also selected mageba’s flexible plug joint to replace existing joints. To get a more in-depth idea about the joint’s performance it was decided to execute two trial installations.

mageba scope

In 2019 mageba supplied 16 RESTON® SPHERICAL bearings, designed to resist frequent service limit state uplift loads of up to 302 kips (1,344 kN). A full scale bearing was tested to 150 % proof tension load, as well as cyclic tension compression loading to simulate the frequent uplift load case.

All bearings are equipped with structural health monitoring, comprising of tiltmeter, displacement sensor and proximity sensors, that measure the rotation, movement and wear of sliding material respectively. The monitoring system is accessible 24/7 by the owner, through a user friendly web interface.

The trial installations of two types of TENSA®POLYFLEX® flexible plug expansion joints have been completed. In the coming years (2022–23) they will replace the bridge’s aging and damaged compression seal joints.

Refsheet-Delaware-Memorial-Bridge-spherical-bearing

A RESTON-SPHERICAL bearing after assembly

Refsheet-Delaware-Memorial-Bridge-spherical-bearing-packed

One of the bearings ready for shipping

Refsheet-Delaware-Memorial-Bridge-polyflex-flexible-plug-expansion-joint-installation-team

The project team is discussing the next steps coming up during the installation of the POLYFLEX plug expansion joint

Refsheet-Delaware-Memorial-Bridge-polyflex-flexible-plug-expansion-joint-steel-angle

Installation of the POLYFLEX plug expansion joint on two lanes at a time allowing traffic to remain flowing on the other two lanes of the bridge

Polyflex-Promotion-installatioin-Delaware-Bridge

Pouring a layer of the flexible plug joint material

Refsheet-Delaware-Memorial-Bridge-polyflex-flexible-plug-expansion-joint-installation

Installed flexible plug expansion joint on two lanes

En bref

Products:

TENSA®POLYFLEX® Advanced and RapidCure flexible plug expansion joints, RESTON® SPHERICAL bearings with up-lift control

Feature:

Bearings equipped with Structural Health Monitoring System

Installation:

2019 / 2020 / 2021

City:

Wilmington, DE

Structure:

Suspension bridge

Span:

2,150 ft. (655 m)

Length:

10,765 ft. (3,281 m)

Owner:

Delaware River and Bay Authority

Contractor:

American Bridge Company

Engineer:

HNTB Corporation