Headquarters:
mageba sa
Solistrasse 68
8180 Bulach
Switzerland
Tel: +41-44-872 40 50
Fax:
Products
No product found.
Structure-born noise isolation
Vibration damping
VIBRAX-STAIRTOP SL
Pin for fixing the position of concrete elements
Vulcanized elastomer sheath reduces structure-borne noise transmission
Installation sleeve available for prefabricated structural elements
Damping system
Vibration damping
Tuned mass dampers
For TMD masses of up to 10 t
For TMD tuning in the range 1.3 to 10.0 Hz
Wear-free dampers
Temperature-stable damper fluids for indoor and outdoor use
Individual dimensioning
Stair bearing
Vibration damping
VIBRAX-STAIR
Bearing for the structure-borne sound insulation of stairs
Suitable for common bearing applications and stair slab weights
Designed for all loads and widths
Suitable for prefabricated or in-situ concrete construction
Impact sound insulation
Vibration damping
VIBRAX-DAMP 17-8
For pressures of up to 100 kN/m2
Can reduce impact/footfall noise by approx. 30 dB
Profiled rubber fibre mat
Also suitable for tackling structure-borne noise
Certified with the CE label
Impact sound insulation
Vibration damping
VIBRAX-FOAM 17/8
For pressures of up to 20 kN/m2
Can reduce impact/footfall noise by approx. 35 dB
Profiled mat from granulated PU foam material
Suitable for isolation of structure-borne noise and vibrations
Certified with the CE label
Impact sound insulation
Vibration damping
VIBRAX-FOAM 8/4
For pressures of up to 20 kN/m2
Can reduce impact/footfall noise by approx. 30 dB
High reduction of impact sound with minimum installation thickness
Also suitable for isolation of structure-borne noise and vibrations
Certified with the CE label
Impact sound insulation
Vibration damping
VIBRAX-MULTI 8/4
For pressures of up to 100 kN/m2
Can reduce impact/footfall noise by approx. 26 dB
Profiled rubber granulate mat bonded with PU elastomer
Suitable as sound insulation on wooden structures
Certified with the CE label
Vibration isolation bearings
Vibration damping
VIBRAX-DAMP B
Load range: 300 to 700 kN/m2
Natural frequency range: > 18 Hz
Profiled elastomeric bearing of EPDM
The cross-sectional profile of the bearing minimises transmission of transverse forces
Vibration isolation bearings
Vibration damping
VIBRAX-DAMP C
Load range: 1000 to 4000 kN/m2
Natural frequency range: > 19Hz
Profiled elastomeric bearing of natural rubber (NR)
One side profiled with cylindrical rubber studs
Can be freely cut to size
Vibration isolation bearings
Vibration damping
VIBRAX-CRANE
Structure-borne sound insulation of 20-30 dB, depending on frequency
Specially developed system for vibration isolation of crane rails
Reinforced and unreinforced vibration-damping bearings as vertical / horizontal bearings
Vibration isolation bearings
Vibration damping
VIBRAX-BLOCK
Load range: 3,000 to 10,000 kN/m2
Natural frequency range: > 5 Hz
Reinforced elastomeric bearing of natural rubber (NR)
Suitable for use in groundwater
Load- and requirement-specific production
Vibration isolation mats
Vibration damping
VIBRAX-MULTI
For pressures of up to 200 kN/m2
Can reduce impact/footfall noise by approx. 24 dB
Rubber granulate mat bonded with PU elastomer
Suitable as sound insulation on wooden structures
Certified with the CE label
Vibration isolation mats
Vibration damping
VIBRAX-DAMP
Load range: 50 to 4000 kN/m2
Natural frequency range: > 15 Hz
Rubber fibre mat bonded with PU elastomer
Installation thicknesses from 10 to 30 mm
Vibration isolation mats
Vibration damping
VIBRAX-DYN
Load range: 75 to 9000 kN/m2
Natural frequency range: > 6 Hz
Closed-cell PUR elastomer mat
Suitable for use in groundwater
Coloured according to load-bearing capacity
Vibration isolation mats
Vibration damping
VIBRAX-PUR
Load range: 10 to 2800 kN/m2
Natural frequency range: > 8 Hz
Mixed-cell PUR elastomer mat
Coloured according to load-bearing capacity
Easy installation and high long-term stability
