Тел: +41-44-872 40 50
In 2004, the existing expansion joint was replaced on the S-10 Viaduct near Bulach, between Zurich and Schaffhausen (Switzerland).
The so called twin bridge has a total length of about 295 meters and is supported on 8 twin columns. The spans between supports are between 23 and 40 meters.
After about a 20-year-long useful life, the existing expansion joints were replaced by a mageba RSFD cantilever finger joint construction.
Two RSFD cantilever finger joints, with a maximum movement capacity of 160mm, were installed on the northern side of the Viaduct. Single gap expansion joints with a movement capacity of 80mm were used on the southern side. Due to the open construction of the cantilever finger joint, a maintenance-friendly drainage system with a sideways fixed overflow system was chosen. In order to optimise the driving comfort and to expand the fatigue live of the asphalt, supporting ribs with the Robo®Dur system were placed on both sides of the joint. The supporting ribs secure massive strengthening of joint beams, so that lane grooves do not form in the asphalt, as a result of heavy loads. The supporting ribs are aligned under a 45º angle.
TENSA®FINGER type RSFD, TENSA®GRIP type RS, ROBO®DUR asphalt strengthening ribs
max. movement 160 / 80mm