Головной офис
mageba sa
Trafostrasse 1
8180 Bulach
Switzerland
Тел: +41-44-872 40 50
Факс:
Extensive refurbishment work was carried out in the multi-storey car park "Messe Zurich Hallenstadion" in Zurich.
One measure concerned the support of the Hoesch-Additiv ceiling ribs with folding beams. The support has to be elastic, but at the same time very small tolerances in terms of short and long-term creep as well as dimensional accuracy are required.
In addition, the bearing should also be able to accommodate rotations despite the thin layer thickness.
A total of 14,170 units of LASTO®BLOCK F with special design requirements were delivered.
The limited vertical deformation and rotational capacity requested were met by the bearing's specially adapted layer thickness.
Due to the exposure of the bearings it was also essential to use stainless steel for the reinforcement of the elastomeric bearings.
The product solution convinced with its ability of combining the stainless steel with the elastomer as well as the specially used elastomeric compound allowing predictions of the creep deformation.
Type: | LASTO-BLOCK F |
Installation: | 2017 |
City: | Zürich |
Type: | Park house |
Completion: | 2018 |
Contractor: | Schneider Stahlbau AG |
Engineer: | Peter Bachmann Ingenieurbüro |