TENSA-MODULAR-LRLS-mainimg

Modular joints

TENSA-MODULAR LR

product_logo_expansion-joints

Expansion joints

Principle

mageba TENSA-MODULAR multiple-gap expansion joints can accommodate movements in every direction and rotations about every axis. They can be used for longitudinal movements of as little as 120 mm, or for very large movements of well over 2,400 mm. The total movement of the bridge deck is divided among a number of individual gaps which are created by horizontal surface beams. The individual gaps are sealed by watertight elastomeric profiles, and surface beam movements are regulated by an elastic control system. The drainage of the joint is via the drainage system of the bridge deck.

Applications

TENSA-MODULAR expansion joints are used when the movements of a bridge exceed the capacity of a single gap joint. The watertight system, which was invented by mageba several decades ago, is designed on a modular basis and can be tailored to satisfy the specific requirements of almost any structure.

TENSA-MODULAR-LRLS-img1

Installed 24-gap joint allowing 1,920 mm of movement and weighing 41,000 kg

TENSA-MODULAR-LRLS-img2

Control system with control springs and connection plates

TENSA-MODULAR-LRLS-img3

Installation works on the Run Yang Bridge

TENSA-MODULAR-LRLS-img5

Transverse movement capacity of the joint

TENSA-MODULAR-LRLS-img6

Vertical movement capacity of the joint

TENSA-MODULAR-LRLS-img7

Fatigue testing of an LR joint

TENSA-MODULAR-LRLS-img8

Seismic testing of an LR joint

TENSA-MODULAR-LRLS-img9

FUSE-BOX during an earthquake

TENSA-MODULAR-LRLS-img11

Transport of a modular expansion joint

TENSA-MODULAR-LRLS-img12

Installation of a modular expansion joint

TENSA-MODULAR-LRLS-mainimg2

TENSA-MODULAR expansion joint equipped with noise-reducing sinus plates